Fire wire and cable series
当前位置
Fire wire and cable series

Standard:

  Electrical performance products, like ordinary wire and cable, flame retardant, fire resistance in line with national standards GB/T18380-2001 (1EC60332: 1993), GB/T12666-1990 or national public safety industry standard GA306-2001 the requirements.

Use Occasions:

  For a flame retardant, fire resistance, low smoke low halogen, low smoke zero halogen fire safety requirements, which are occasions, such as large-capacity power plants, nuclear power plants, subway, high-rise buildings, lots, and so densely populated.

Product name, type and use:

Name Model Level Scope
Flame Retardant Series ZR IV A 35kv and below of AC rated voltage plastic insulated
flame retardant power cables, AC rated voltage
450/750V and below flame-retardant plastic insulated
control cable and AC rated voltage 450/750V and below
flame-retardant plastic insulated cables
 
IV B
IV C
I A
I B
IC
II A
II B
II C
III A
III B
III C
Fire Series NH I A AC rated voltage plastic insulated fireproof power cables
0.6/1kV, AC rated voltage 450/750V and below the plastic
insulation resistant control cable and AC rated voltage 450/750V
and below the plastic insulation fire-resistant cables.
I B
II A
II B
III A
III B
IV A
IV B

Flame-retardant performance level technical requirements:

Flame retardant grade \ Project Char height Smoke toxicity
(Concentration)
mg/L
Smoke density
(Minimum light transmittance)
%
Test conditions Technology
Indicators
Volume of the sample non-metallic
L/m
Temperature in fire
Time for fire
min
Flame Ⅰ I A 7.0 >815 40 ≤2.5 ≥12.4 ≥80
I B 3.5
I C 1.5 20
Flame Ⅱ II A 7.0 40 ≥60
II B 2.5
II C 1.5 20
Flame Ⅲ III A 7.0 40 ≥6.15 ≥20
III B 3.5
III C 1.5 20
Flame Ⅳ IV A 7.0 40 - -
IV B 3.5
IV C 1.5 20
Note:IV A、IV B、IV C Can be expressed as, respectively,A、B、C

Fire resistance level and technical requirements:

Flame retardant grade \ Project Fire-resistant properties Smoke toxicity
(Concentration)
mg/L
Smoke density
(Minimum light transmittance)
%
Test conditions Technology
Indicators
Sample applied voltage
(U0/U)/V
Temperature in fire
Time for fire
min
Flame Ⅰ I A Voltage specified value of the product 950-1000 90 3A
Fuse is not blown
≥12.4 ≥80
I B 750-800
Flame Ⅱ II A 950-1000 ≥60
II B 750-800
Flame Ⅲ III A 950-1000 ≥6.15 ≥20
III B 750-800
Flame Ⅳ IV A 950-1000 - -
IV B 750-800
Note:IV A、IV B Can be expressed as, respectively,A、B
Sales Tel:
(086-510)87291372
(086-510)87291965

E-mail:
guanghuicable@163.com
Website:
www.guanghuicable.com

ADD:
No.78 Xinfeng Load, Guanlin Town, Yixing, Jiangsu
P.C.: 214252